Description
25mm length, 10mm diameter.
You’ll receive more than you order just in case one or two are faulty.
Actual color and color density may vary.
To insert these through metal eyelets, push the tip through then pull the tip to pull the rest through until it snaps into place. They are very stretchy.
Made from high performance platinum cure liquid silicone compounds that are used for a variety of applications including medical prosthetics.
A fabric backing is used, which is permanently adhered to the silicone.
Notes:
That the inside of the hood may have spots where the silicone is not visible. This is perfectly normal, and does not affect the overall quality of the hood in any way.
Nose rivets in some of the images are not the final product. These items have the four-rivet noses.
Certified Skin Safe
Test Report No: MB 16-24539.19 Date: August 25, 2016
SAMPLING DETAIL: Test samples were submitted to the laboratory directly by the client. No special sampling conditions or sample preparation were observed by MB Research Laboratories.
DATE OF RECEIPT: Samples were received at MB Research Laboratories facilities on June 3, 2016.
PROTOCOL: 713-02
TEST REQUESTED: Evaluate for the potential to elicit delayed dermal contact sensitization. This study was conducted based on the requirements of OECD TG 439, in accordance with the EU classification R38 and GHS category 2 requirements: Tests for irritation and skin sensitization.
TEST RESULTS: The test article showed no evidence of causing dermal contact sensitization and was classified as a non-irritant.
PERFORMED BY: Matthew Troese, Ph. D., Study Director
TEST FACILITY:
MB Research Laboratories
1765 Wentz Rd
P.O. Box 178
Spinnerstown, PA 18968